|
-The manual Pir-Alu is in PDF format. -To read or print Acrobat Reader needs to be installed. |
Internet |
||||
|
-Avaiable Certificates: |
|||||
|
Subject |
Test Procedure |
Trial Objetive |
Result |
Accepted |
Language |
|
Thermal
Conductivity: |
EN 12667 |
"Coefficient of
Thermal Conductivity" |
l=0,025 W/m·K |
International |
|
|
Reaction Fire:
|
UNE 23721-90 UNE 23727-90 |
"Method
reaction fire of the building materials. -Classification of the materials
used in the building" |
M-1 |
Spain France |
|
|
|
BS
476 CLASS 0 |
"Opinion of compliance with the requirements for Class
0" |
Class 0 |
U.K. Internacional |
|
|
|
BS 476, part 6
|
"Method of test
for fire propagation for products" |
Class
0 |
U.K. International |
|
|
|
BS 476, part 7 |
"Method For
Classification Of The Surface Spread Of Flame Of Products" |
Class
1 |
U.K. International |
|
|
Smoke opacity: |
NF X10-702 |
"Emission de fumée. Essai de mesure de la densité optique
spécifique de le fumée émise par la combustion ou la pyrolyse des matériaux
solides". |
VOF4=2.3 |
Spain France International |
|
|
Smoke toxicity: |
NF X10-700 NFF 16-101 |
"Essais de comportement au feu. Analyse des effluents gazeux. Partie 2: méthode de dégradation thermique au four tubulaire. Calcule de l'indice de fumées et l'indice de toxicité des gaz emis". |
F-1 |
Spain France International |
|
|
Total Ruggedness: |
|
"Determining PIR-ALU airflow duct panel total
roughness" |
K=0,25 mm |
Spain International |
|
|
Load Loss: |
CEN/TC156/WG3N207 |
"Determination of the load loss of the ducts built with
panel PIR-ALU" |
|
UE International |
|
|
Sealed and Leakage: |
CEN/TC156/WG3N207,
4ª revisión, Aptdo 4.3 |
"Determination of the leakaged of the ducts built with
panel PIR-ALU" |
|
UE International |
|
|
Deformation: |
CEN/TC156/WG3N207,
4ª revisión, Aptdo 6.3 |
"Determination of the behavior to the deformation in the
PIR-ALU air ducts " |
|
UE International |
|
|
Board Stiffness:: |
CEN/TC156/WG3N207,
4ª revisión, Aptdo 6.1 |
"Determining the rigidity of a sheet sample for
manufacturing of airflow ducts commercially named PIR-ALU 35 kg/m3,
20mm" |
199.411 N.mm2 |
UE International |
|
|
|
CEN/TC156/WG3N207,
4ª revisión, Aptdo 6.1 |
"Determining the rigidity of a sheet sample for
manufacturing of airflow ducts commercially named PIR-ALU 45 kg/m3,
20mm" |
258.745 N.mm2
|
UE International |
|
|
|
CEN/TC156/WG3N207,
4ª revisión, Aptdo 6.1 |
"Determining the rigidity of a sheet sample for
manufacturing of airflow ducts commercially named PIR-ALU 35 kg/m3,
30mm" |
572.000 N.mm2
|
UE International |
Spanish English |
|
|
|||||
|
|
|
|
